Board IDs to use with CMake for Arduino

If you’re like me, you don’t like the Arduino IDE that much. I
much prefer a good texteditor and a toolchain behind it to build
and upload the code. CMake to the rescue. One thing you have to
configure in your CMakeLists.txt file is the BOARD_ID to tell it
which board you are using. Here’s the list of IDs since I couldn’t find
them on the github page for the CMake project.

–uno: Arduino Uno
– atmega328: Arduino Duemilanove w/ ATmega328
– diecimila: Arduino Diecimila or Duemilanove w/ ATmega168
– nano328: Arduino Nano w/ ATmega328
– nano: Arduino Nano w/ ATmega168
– mega2560: Arduino Mega 2560 or Mega ADK
– mega: Arduino Mega (ATmega1280)
– mini328: Arduino Mini w/ ATmega328
– mini: Arduino Mini w/ ATmega168
– ethernet: Arduino Ethernet
– fio: Arduino Fio
– bt328: Arduino BT w/ ATmega328
– bt: Arduino BT w/ ATmega168
– lilypad328: LilyPad Arduino w/ ATmega328
– lilypad: LilyPad Arduino w/ ATmega168
– pro5v328: Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328
– pro5v: Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168
– pro328: Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328
– pro: Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168
– atmega168: Arduino NG or older w/ ATmega168
– atmega8: Arduino NG or older w/ ATmega8

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s